Packs/Racks/Baskets

- AIRFLOW CONTACT SYSTEM offers perfect back ventilation - VENTIFLAP for uphill- and downhill mode adjustment - 2 BOTTLE CARRIERS with extra safety fixation - easy to reach - Includes 1.5L bladder and magnetic tube clip

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

A durable, carry-everything full frame pack that installs quickly to let you adventure farther. - Available in four sizes to best fit more frames and adventures - Mount with thumb screws (sold separately) to bikes with integrated boss mounts - Large main pocket and smaller compartment pocket make it easy to stay organized - Gold lining and internal mesh pockets make finding your gear a cinch - Water-resistant construction helps keep your gear dry - Durable materials and robust zippers are designed to last

A secure, direct-mounted saddle bag with quick connections for the Blendr Fendr and rear lights - Quickly connect Blendr Fendr and rear lights with purposeful mounts in seconds - Two internal pockets reduce rattling and hi-vis material makes it easy to find what you need - Made with durable, soft, and water-resistant nylon with an easy-to-use zipper - Integrated design that mounts directly to compatible saddles with 2 m5 hex bolts - Compatible with Aeolus, Verse, Boulevard, and Commuter saddles. Not compatible with RSL-level saddles - Included: bag, mount, spacer, one pair of short bolts, and one pair of longer bolts

Front cargo rack designed for the crown mount-equipped Farley fork. STRAP IN Bolt this custom rack onto your crown mount-equipped Farley fork and carry all your gear. PRODUCT DETAILS - Made of lightweight, durable aluminum - Mounting hardware included - Max weight capacity 7 kg (15 lbs.) - Not intended for use with child carriers

Rear cargo rack designed for the new Farley. BE PREPARED Gear up and go farther with this versatile rear rack. Includes options for mounting panniers on the sides and a bag on top. Custom-made for the new Farley, this rack was designed with a dropper seatpost in mind, allowing you to get low on rough terrain and make loaded-down remounts easier. PRODUCT DETAILS - Made of lightweight, durable aluminum - Mounting hardware included - Max weight capacity 25 kg (55 lbs.) - Not intended for use with child carriers

Genuine replacement parts Assemble your cargo rack properly with genuine replacement parts. Genuine Backrack parts assure proper rack to bike connection. - Mounting hardware not included - Assure proper rack-to-bike connection - Contains: 10mm spacer, L-bracket and anti-rotation bracket

Original replacement rack for Trek 920. Product details - Designed to fit forks with forward-facing eyelets at the dropout - Designed specifically for use with Trek 920 bikes Specifications - Size: One size - Rack type: Front racks - Adjustable feet: No - Disc compatible: Yes - Includes light mount: No - Weight capacity: 50 lbs (22 kg) - Material: Aluminum

The perfect quick-mount front rack system for MTB suspension forks or rigid forks without rack eyelets. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independently from the fork angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allows mounting on a wide range of bikes. Also compatible with KLICKfix / RackTime Snapit or Vario system bags. - Attachments: Fork with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags, RackTime Snapit / Vario system bags - Max Load: 10kg / 22lb - Clamp for front reflector - Size: 37. 4 x 32.2 x 16.5cm / 14.7" x 12.7" x 6.5" - Weight: 910g / 2.01lb

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware, Anything Cage Bag, and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

Updated for summer 2022! Welded top lid and recycled fabrics! The Gas Tank is a high end, high volume top tube bag for carrying a ton of food and other gear. It offers substantial storage in an easy access case. The updated 3D welded top lid zips open on both sides for one-handed access while riding or open up both when stopped for full panel access to the contents. Great for snacks, tools, navigation and whatever you want to have fast access too! Welded top lid for added water resistance Smooth sliding premium urethane coated YKK RC zipper. One handed access to contents while riding Fully padded with closed-cell foam Interior lined with bright fabric for greater visibility Hook and loop interior divider for organizing small stuff Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts Beefy tube strap has grippy material with double back wrap for bomber stability Interior key ring keeper clip

Need just a wee bit more carrying space on your bike? Look no further. The Jerrycan® is a slim, rear mounting bag ideal for a repair kit, lube or a tube -- leaving more space for essentials in a frame bag. At two inches wide, the Jerrycan is narrow enough that your legs won’t hit it when pedaling Plastic stiffened side panels prevent side bulging Interior elastic holds a multi-tool Rear daisy chain for adjustable height attachment Grippy attachment to top tube Plastic HDPE side panel inserts

The Mag-Tank™ 2000 utilizes the same proven, zipper-free magnetic access of the Mag-Tank but boasts 50% greater capacity. Named after it's calorie holding capacity, the Mag-Tank 2000 has a tapered wedge shape that gives it impressive volume while still offering a lean profile at it's base. A locking cam provides a secure front attachment, while still utilizing the adjustable daisy chain to allow clearance from stem clamp bolts. The bag's closed cell foam padded base and stiffened side panels provide protection and structure for food and electronics with the ease of fast, one handed access. Please note - While the cover to this bag is designed to shed rain and spray, due to the large panel opening it is not a sealed bag or waterproof bag. Additionally, while the closure is secure there is the possibility that small or loose objects can come out of the bag from rough trails or lying the bike on it's side. We recommend small items like loose keys and gummy bears are put in a ziplock. Single-handed access with effortless magnetic closure Side panels stiffened with HDPE plastic sheets Wrap around panel is padded with EVA closed cell foam Piping stiffened front opening Interior lined with yellow fabric for greater visibility Adjustable height daisy chain, with cam locking front strap attachment with a spacer block to clear stem clamp bolts Beefy top tube strap has grippy material and a double back wrap for bomber stability

The Mag-Tank™ 2000 utilizes the same proven, zipper-free magnetic access of the Mag-Tank but boasts 50% greater capacity. Now available as a bolt-on to utilize top tube bolt bosses! Named after it's calorie holding capacity, the Mag-Tank 2000's tapered wedge shape gives it impressive volume while still offering a lean profile at it's base. A locking cam provides a secure front attachment, while still utilizing the adjustable daisy chain to allow clearance from stem clamp bolts. The bag's closed cell foam padded base and stiffened side panels provide protection and structure for food and electronics with the ease of fast, one handed access. Please note - While the cover to this bag is designed to shed rain and spray, due to the large panel opening it is not a sealed bag or waterproof bag. Additionally, while the closure is secure there is the possibility that small or loose objects can come out of the bag from rough trails or lying the bike on it's side. We recommend small items like loose keys and gummy bears are put in a ziplock. Single handed access with effortless magnetic closure Two sets of mounting holes on bag bottom to allow bolt-on attachment to top tube First set of mounting holes spaced 76 mm (+/- 2 mm) from front of bag Second set of mounting holes spaced 100 mm (+/- 2 mm) from front of bag Distance between mounting holes is 64 mm (standard water bottle cage spacing) Velcro secured, padded bag bottom conceals mounting bolts Side panels stiffened with HDPE plastic sheets Interior lined with yellow fabric for greater visibility

The Ranger is a workhorse of a frame bag. Designed to make use of the full triangle, the Ranger is an off-the-shelf bag that fits a huge range of standard mountain and fatbike geometries. We used our wealth of knowlege from years of custom bag building to deliver on a bomber feature rich bag that you can swap to different frames for years to come. As frame bags are intended to carry dense items like food and water, we emphasize durability and fast access in the design and features. Ranger bags can be loaded full and still accessed while riding. Something that is impossible with higher bulk, roll closure frame bags. Zipstretch ™ construction - Pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag X-Pac panels that are two times as abrasion resistant as standard VX material Industry leading #10 molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers Exit port in main compartment for hydration tube or wires Bags feature one main compartment with vertical divider Expanding taper front section for increased volume at head tube Stretch mesh internal pocket Front top tube attachments accommodate top tube packs Made in the USA with domestic and imported materials

If miles upon miles of open dirt roads are your calling, the Ripio® frame bag will haul your stuff. The Ripio is the full-frame solution for your road, gravel or touring bike. With geometry optimized for frames with tall top tubes & head tubes, the Ripio fits a huge range of bikes and is packed with features that make use of the larger frame space road geometry provides. Zipstretch ™ construction - Pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag X-Pac panels that are two times as abrasion resistant as standard VX material Industry leading #10 molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers Exit port in main compartment for hydration tube or wires Zippered left side pocket with dividers that organizes small items Lower zippered compartment with horizontal divider that opens to create one large compartment Additional vertical divider in top section of LG & XL sizes to avoid leg interference Urethane coated webbing for easy cleaning, movable velcro one-wrap attachments for frame fitting Front top tube attachments accommodate top tube packs Made in the USA with domestic and imported materials

The Sweetroll® is our standalone, 100% waterproof, bikepacking handlebar bag. It’s highly versatile with dual side roll down closures that allow for a wide range of load carrying options. The modular front system integrates with our front pockets for additional storage. Sweetrolls are built with radio frequency welded seams. Waterproof RF welded construction. Adjustable stacking spacers offset the Sweetroll from the handlebar and prevents cable and lever interference and bag abrasion - An original Revelate Designs innovation. Manta Flap - Shove stuff between the flap and the main bag. Features two rows of daisy chain webbing for custom configurations. Swap it out for a pocket for added capacity. Fiberglass cross stiffener adds rigidity to the mounting area and provides structure when packing and unpacking. Thick EVA foam spacer block at the head tube prevents abrasion and bag wear against bike frame.

The Sweetroll® is our standalone, 100% waterproof, bikepacking handlebar bag. It’s highly versatile with dual side roll down closures that allow for a wide range of load carrying options. The modular front system integrates with our front pockets for additional storage. Sweetrolls are built with radio frequency welded seams. Waterproof RF welded construction. Adjustable stacking spacers offset the Sweetroll from the handlebar and prevents cable and lever interference and bag abrasion - An original Revelate Designs innovation. Manta Flap - Shove stuff between the flap and the main bag. Features two rows of daisy chain webbing for custom configurations. Swap it out for a pocket for added capacity. Fiberglass cross stiffener adds rigidity to the mounting area and provides structure when packing and unpacking. Thick EVA foam spacer block at the head tube prevents abrasion and bag wear against bike frame.

We set out to create the most stable, low profile mounted, feature loaded, waterproof seat bag available. The Spinelock seat bag checks all the boxes. The Spinelock integrates user tested and approved features like a one-way air purge valve, rear light slots, loop and bungee deck, and an external plastic bottom with a new patented attachment system. Stability was the driving element in the design process. If you want something you can pack and forget, the Spinelock is your seat bag. There are two size options, neither of which sacrifice features for capacity. The smaller but largely versatile Spinelock 10L maximizes your carry with minimal tire clearance and provides a generous amount of waterproof storage with additional space on the external corded deck. . If you are going on a long expedition or carrying cold weather gear we recommend checking out the Spinelock 16L. How it works: - The Spinelock stability system consists of three components: the saddle clamp, seat bag mounted "Spine" baseplate, and pin. - A low profile, high strength, forged aluminum clamp works in combination with precision IGUS bushings to form the pin interface. Twin forged upper arms, fastened by Torx-25 bolts, rotate into position above the saddle rails for easy mounting. - Resembling a spine ramp familiar to skateboarders, the "Spine" baseplate is made of an impact resistant UV-stabilized nylon and is integrated to the seat bag surface. The plate features two mounting positions to accommodate seatpost setback and saddle adjustments. To connect the bag, you simply line up your selected mounting position to the seat mounted clamp and slide the pin through the aligned holes. Attaching the side compression straps to the wings of the clamp fixes the pin in place and you're ready to ride!

The legendary Tangle® is the original half frame bag. It offers substantial cargo capacity in a sleek, rectangular shape that fills unused space on your bike. Stash your food, tools, and a mini pump and you're ready for any adventure, big or small. Build quality is second to none, we've obsessed and honed the details for a bag you can rely on for years. Tangles are great places to store extra water and calories on longer rides. They can usually be run on a bike while keeping access to both water bottle cages (use side entry cages). Zipstretch™ construction - Pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag Cire finished side panels that are two times as abrasion resistant as standard X-Pac materials Industry leading #10 molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers Exit port in main compartment for hydration tube or wires Zippered left side pocket with dividers organizes small items Urethane coated webbing attachments don’t absorb water or grit Daisy chain front top tube attachment accommodates any top tube bag configuration Padded with closed cell foam along all tube sections Internal pump straps along top tube Low-profile cam-lock buckles Made in the USA with domestic and imported materials

Weighing just 290 grams (including adapter), the fork pack offers approximately 4.1 liters of additional storage space for bike packing. With the help of the QLS adapter, this ultra-light bag with roll closure can be mounted on forks with eyelets or cage mounts intended for this purpose, as well as on forks without cage mounts, as long as the fork blades sport a constant diameter of 30mm to 42mm. Specifications: - Ultralight, waterproof bag (single pocket) with roll closure - The Fork-Pack is primarily designed for attachment to bicycle forks, but it can be mounted on non-tapered vertical tubes with a consistent diameter, e.g. Kick Style Scooters - Abrasion-resistant PU-coated nylon fabric - Allows additional luggage to be carried on bikes using the Quick-Lock S (QLS) adapter system - Adapter is compatible with forks with eyelets and tubes with constant diameter from 30 mm to 42 mm - The Quick-Lock S mounting bracket may be bolted directly to a fork with „braze-on“ eyelets or attached to vertical tubes using the supplied band-clamps - Ultra-fast installation, with one click the bag snaps in to place - The removal is just as fast, simply move the release lever and pull the bag upwards - The robust Quick-Lock S mounting plate remains mounted to the bicycle - Low profile locking elements ensure snag-free use - Internal stiffener - Reflective ORTLIEB logo - Maximum load 3kg / 6.6lbs

Ortlieb's far traveled classic model made of robust polyester fabric is designed for lowriders in the front or for the rear rack and is also suitable for children's bikes. With its QL2.1 system, it is quickly mounted and taken off the bike rack. - Classical pannier (pair) with roll closure - Can be used individually or as pairs for the rear or lowrider - Sides of PS490 nylon material, front and back of PD620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10, and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Symmetrical shape allows use on right or left side - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Ideal for use on children's/youth bicycles - Easy to clean inside

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

This basket is as sweet as honey. It's perfect for holding all your things, large and small. Easily attach and remove this MIK basket from your rear rack for added functionality and fun. You have things. We have things to hold those things. - Compatible with MIK rear racks / MIK adapter plate installed - Proprietary Electra design - Honeycomb patterned stamp - Powder-coated steel - Carries up to 9kg (20lb) - Dimensions: 34cm (l) x 23cm (w) x 27.5cm (h) - Attachment: MIK - Includes hardware: Yes - Weight: 1.02kg

The magic is in the mounting MIK stands for Mounting is Key, and this rad rear rack comes equipped with this functionality. Because easy is the name of the game. Easy on. Easy off. Carry your cargo in style. - MIK compatible - Carrying capacity up to 25kg or 55lbs - Stainless steel hardware included - Rear rack designed to be compatible with most Electra 24" wheel models

Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.