Filter By:
- Show More Brands
- Show Fewer Brands
Headsets
$214.99
Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1.5-degrees so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.
$175.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Aluminum dual seal crown race protects lower bearing
- Interlok spacer compatible
- 110 year warranty
$175.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Aluminum dual seal crown race protects lower bearing
- Interlok spacer compatible
- 110 year warrranty
$160.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets.
• Technical Description: ZS44/28.6/H8/K|ZS44/30/H4/x
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Top-quality, sealed stainless steel bearings
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 44.00mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075 aluminum
• Weight: 88.47g
$159.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
$143.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
$143.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Aluminum dual seal crown race protects lower bearing
- Interlok spacer compatible
- 110 year warranty
$99.99 - $119.99
Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing.
- Designed to bridge the gap between the 40-series and 110-series headsets
$94.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets.
• Technical Description: EC34/28.6/H16/x
• Top Type: EC - External Cup
• Top Head Tube Inside Dia.: 34mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 16mm
• Top Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075 aluminum
• Weight: 55.26g
$94.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. And, the 110 comes with an amazing 110-year, no-questions-asked warranty!
- Technical Description: IS41/28.6/H9/x
- Top Type: IS - Integrated
- Top Head Tube Inside Dia.: 41.1mm
- Stem Clamp Dia.: 28.6mm
- Top Stack Height: 9mm (Short), 15mm (Tall)
- Top Bearing Type: Top-quality, sealed stainless steel bearings
- Material: 7075 aluminum
- Weight: 41.81g
$94.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Interlok spacer compatible
- 110 year warranty
$94.99
This is the Short Top Cover for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
- For 1 1/8-inch fork/headset
- Stack height: 8mm
- 53 grams
$94.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Interlok spacer compatible
- 110 year warranty
$94.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets.
• Technical Description: ZS44/28.6/H15/K|ZS44/30/H4/x
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 15mm
• Top Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075
• Weight: 95.62g
$63.99 - $94.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$84.99
Cane Creek's engineers were tasked with developing a no-compromise, best-in-class premium headset. With the introduction of their 110-Series, they did just that—choosing optimal materials, engineering the most effective internals and designing the best aesthetics available in a headset.
- Technical Description: EC44/33/H12/x
- Bottom Type: EC - External Cup
- Bottom Head Tube Inside Dia.: 44.00mm
- Crown Race Seat Dia.: 33.03mm
- Crown Race Type: Aluminum, Dual-Seal
- Bottom Stack Height: 12mm
- Bottom Bearing Type: Top-quality, sealed stainless steel bearings
- Material: 7075 T-6 aluminum
- Weight: 58.29 grams
$84.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: EC44/40/H12/x
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.00mm
• Crown Race Seat Dia.: 39.76mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075 aluminum
• Weight: 61.02g
$84.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: EC49/30/H12/x
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075 aluminum
• Weight: 83.01g
$84.99
This is the Bottom External Cup for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$84.99
This is the Bottom for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
- For 1.5-inch crown race diameter
- Stack height: 4mm
- 54 grams
$84.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
Technical Description: ZS56/30/H4/x
Bottom Type: ZS - ZeroStack
Bottom Head Tube Inside Dia.: 55.95mm
Crown Race Seat Dia.: 30.015mm
Crown Race Type: Aluminum, Dual-Seal
Bottom Stack Height: 4mm
Bottom Bearing Type: Top-quality, sealed stainless steel bearings
Material: 7075 aluminum
Weight: 61.34g
Part Number: BAA0156x
$78.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$74.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$64.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
- Technical Description: EC34/30/H12/x
- Bottom Type: EC - External Cup
- Bottom Head Tube Inside Dia.: 33.95mm
- Crown Race Seat Dia.: 30.015mm
- Crown Race Type: Aluminum, Dual-Seal
- Bottom Stack Height: 12mm
- Bottom Bearing Type: Top-quality, sealed stainless steel bearings
- Material: 7075 aluminum
- Weight: 42.20g
$64.99
This is the Integrated Bottom Bearing for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$63.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: IS52/30/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Weight: 45.25g
$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Uses 36/45 degree crown race and compression ring
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability, and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Uses 36/45 degree crown race and compression ring
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
Page 1 of 3
Next page