Other

Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.

The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.

The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system. - Thread Length: 9mm - Thread Pitch: 15 x 1.5mm

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!

The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever

Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.

- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs

- Grade 10 chromium steel balls

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs Specifications: - Size: Rear drive side, Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut

The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters

Original equipment replacement rear derailleur hangers. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

The OCLV Carbon Mono Bar Extension delivers an even more aerodynamic leading edge to Trek's drag-defying Speed Concept (Gen 2). These straight and S-Bend extensions are designed to be cut to length and have internal routing for standard or Di2 cables. - Designed specifically for 2014 Speed Concept - OCLV Carbon fiber mono extensions - Straight and S-Bend extensions are designed to be cut to length - Internally-routed for Di2 and standard cables - Designed to accept 22.2mm standard extensions

Genuine replacement parts When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Details: - Replacement cartridge units for Bontrager Line Dropper seat posts - Be sure to use the correct size cartridge for the respective amount of travel - Regular maintenance will help maintain performance and extend the lifespan

Key features: - Cable actuated remote lever for the Bontrager Drop Line dropper seatpost - Also compatible with most other cable-actuated dropper seatposts - Under Bar Lever is designed to ergonomically replace the left shifter on 1x drivetrains - Universal Lever is compatible with 1x, 2x, 3x drivetrains and left or right hand placement - Use with: Drop Line Seatpost

Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands

Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375

Upgrade your Ritchey WCS 4-Axis stem with these lightweight titanium bolts. - 6pcs M5 / p0.8mm /18mm length - Fits WCS 4-Axis stems

Get ready to get fast with Vision's Team Clip-Ons. The butted-aluminum J-bend extensions are light and stiff, plus they feature fully internal cable routing. You'll also love the 3-position carbon arm rests with supportive foam pads for dialing in your ideal aero position.

This aluminum top cap is designed to match the Ritchey Comp series headset and stem.

Mounting hardware fits a variety of Cane Creek shocks.

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement Barends for GP5 and GP5 BioKork Grips. - Note because of additional leverage of GP4 and GP5 bar ends, Ergon does not recommend using on carbon fiber handlebars - Glass fiber composite - For 2015 and newer grips

The tool-free Maxle Ultimate Rear brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.

- Yari Solo Air A1 1 year service kit - Includes dust seals, foam rings, o-ring seals, SA sealhead

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 8mm - Outer Diameter: 22mm - Width: 7mm

SRAM's 1x Eagle component system boasts a twelve-speed cassette. We built pulleys that can handle the load better than stock. These CeramicSpeed Pulley Wheels work with less drag, adding to the power transmitted to the rear wheel while offering greater durability, going longer between replacement intervals. These pulleys are also fully compatible with the SRAM Eagle AXS derailleur. The aluminum pulleys with standard bearings are 34.4% more efficient than stock and use our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The upper and lower pulleys both have a narrow-wide tooth design with 14 teeth each. As the upper and lower pulleys have different tasks, they have different shapes. You'll find they are thus marked, and have directional arrows. These pulleys should be installed with stock SRAM pulley spacers. Save those from your old pulleys before installing CeramicSpeed. The kits come with CeramicSpeed Oil in a 15ml dropper bottle and grease in 5ml syringe. The bearings come pre-oiled. The grease can be used on the pulley bearings when riding in particularly harsh environments. In the box: - 2 x 14-tooth pulley wheels - CeramicSpeed Bearing Oil in 15ml dropper bottle - CeramicSpeed Grease in 5ml syringe - Sticker sheet

A five-piece IGUS bushing spacer kit for mounting rear shocks. - Compatible with x eyelet shocks using IGUS bushings mounted in the shock eyelet - Select the correct hardware kit for your mounting bolt diameter (e.g. 6mm, 8mm) and frame mount width (e.g. 22mm, 24mm)

- Aheadset preload adjusting bolt

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. - KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner - Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes - 20 black alloy lined end caps, 10 black POP end caps included

Dimension Seatpost Binder Bolts - 16g

- Lever Internals Gen 2 Guide RSC/Ultimate|Code RSC Qty 1

Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height: 9mm

Alloy headset spacer to fit 1 1/8in fork steerers. - Alloy with FSA logos

FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly

The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer - Tool interface - 4mm hex key

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

OneLoc Remote Upgrade Kit - Upgrade from crown adjust to remote adjust - Includes OneLoc remote lever and compression damper

Remote rebuild kits and subcomponents for Reverb and Reverb Stealth Posts.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included

Disc Brake Adaptors - Includes Stainless Bolts

Replacement extension tower for Zipp aerobars. Compatible With: - HB-VK-STLH-A1

- CHAINRING BOLT KIT 5X2 M8.5X7 / M8.5X5 STEEL BLACK, HIDDEN BOLT INCLUDING SPACER QTY 5

- Bolt On adapters

- SRAM, Road pulleys, 11.7515.060.000

- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No

FSA Standard Headset Bearings

This is a pair of spacers that adapts a 386 EVO crankset to a 68mm BB30 or PF30 frame; use in combination with the standard bottom bracket for your chosen frame.